Fault monitoring and flash controller unit CSW-DCW-02-F

Overview   Accessories/Obelux_CSW2_medium.jpg

Fault monitoring and flash controller unit is a combined photocell, switch-over (master/slave), alarm and flash unit for obstacle lights. Fault monitoring is based on the measuring of the current consumption of the aviation lamp.

Selection of the CSW-unit should be based on the operating voltage and the current consumption of the aviation lamps connected to the unit.

 
     
Technical data
  
Operating voltage: 
10...60 Vdc
  
Max output current:
2/2 A  
Internal day/night switch:  Yes
  
 Number of outputs:  2 (master/slave)  
 Flash mode:  Yes  
 GSM fault reporting: 
No  
 GPS synchronisation: 
No  
Operating temperature: 
-50...+55 °C  
Ingress protection: 
IP65  
 Suitable for:  Obelux first generation obstacle lights  
     
Features   Downloads
  • Light unit monitoring and alarm generation in case of malfunction
  • Flash and steady burning modes, with several selectable flash modes
  • IP 65, suitable for outdoor use
   Datasheet of CSW-DCW-02-F (pdf)
   
   
   
  Order code
  CSW-24-16-GSM-GPS