Fault monitoring and flash controller unit CSW-48-02-GSM

Overview   Accessories/Obelux_CSW4_medium.jpg

Fault monitoring and flash controller unit is a combined photocell, switch-over (master/slave), alarm and flash unit for obstacle lights. Fault monitoring is based on the measuring of the current consumption of the aviation lamp.

Selection of the CSW-unit should be based on the operating voltage and the current consumption of the aviation lamps connected to the unit. The CSW is possible to configure to switch-over (master/slave) mode.

 
     
Technical data
  
Operating voltage: 
48 Vdc
  
Max output current:
4 x 0.5 A  
Internal day/night switch:  Yes
  
 Number of outputs:  4 independent outputs
  
 Flash mode:  Yes  
 GSM fault reporting: 
Yes
  
 GPS synchronisation: 
No (available in CSW-48-02-GSM-GPS)  
Operating temperature: 
-50...+55 °C  
Ingress protection: 
IP65  
  Suitable for:  LI-series low intensity obstacle lights  
     
Features   Downloads
  • Light unit monitoring and alarm generation in case of malfunction
  • Flash and steady burning modes, with several selectable flash modes
  • GPS synchronization option in flash modes available
  • GSM fault monitoring system available (SMS alarms)
  • External day/night switch available as an option (Obelux PCE-DCW-F)
  • IP 65, suitable for outdoor use
   Datasheet of CSW-48-02-GSM (pdf)
   
   
   
  Order code
  CSW-48-02-GSM