Fault monitoring and flash controller unit is a combined photocell, switch-over (master/slave), alarm and flash unit for obstacle lights. Fault monitoring is based on the measuring of the current consumption of the aviation lamp.
Selection of the CSW-unit should be based on the operating voltage and the current consumption of the aviation lamps connected to the unit. The CSW is possible to configure to switch-over (master/slave) mode.
|Technical data |
|Operating voltage: ||24 Vdc |
|Max output current: ||4 x 0.5 A|
|Internal day/night switch:||Yes |
|Number of outputs:||4 independent outputs |
| GSM fault reporting: ||No (available in CSW-24-02-GSM-GPS) |
| GPS synchronisation: ||Yes|
|Operating temperature: ||-50...+55 °C|
|Ingress protection: ||IP65|
|Suitable for:||LI-series low intensity obstacle lights|
| ||Datasheet of CSW-24-02-GPS (pdf)|